MatsuHaku Density Tester

We try to create the best future for manufacturers and research centers.

Porosity and Bulk Density Tester for Fine Ceramic MH-300C,MH-600C

Permeability Density Tester

  • MH-300C/600C


Suitable for:

Fine Ceramic industry, New Material Research institutes


In accordance with ASTM C20/C134/C373/C329, GB/T 2413, 1966, 2834, EN-725, and by adopting the buoyancy method of Archimedean principle, the boiling water method, wax-sealing method and vacuum saturation method can be chosen to use, it can show the measuring result accurately.

Weighing Range
0.01g- 300g
0.01g- 600g
Density Precision
0.001 g/cm3
Settings of water temperature and solution compensation, density setting when using wax-sealing method

●For permeable ceramic products, MH series can directly show the bulk density, apparent density, wet density, apparent porosity, water absorption.

●For impermeable ceramic products, the density and volume can be showed directly!

●For permeable ceramic products,  MH series can show apparent density directly.

●The bulk density can be showed by using wax-sealing method.

●It has the function of water temperature and solution compensation setting.

●The machines can be connected to the PC or printer by RS-232.

●By adopting the design of big tank, it can decrease the inaccuracy caused by supporting wire’s buoyancy.

●Standard size of water tank: 150×100×90mm.